BenchmarkXPRT Blog banner

Category: MobileXPRT 2015

MobileXPRT 2015 Community Preview is here!

Eric Hale
By Eric Hale
on August 14, 2015

Today we are releasing the MobileXPRT 2015 Community Preview (CP1). MobileXPRT 2015 is compatible with systems running Android 4.4 and above. It is a 64-bit application, but will work on both 32-bit and 64-bit hardware.

MobileXPRT 2015 includes the same performance workloads as MobileXPRT 2013, but not the UX Tests. Should you need the UX tests, MobileXPRT 2013 will continue to be available.

Because this is a community preview, you have to be a community member to download it. Members may download the preview from the MobileXPRT tab in the Members’ Area. There are two options for downloading:

  • MobileXPRT 2015 CP1 application and test data, 249 MB
  • MobileXPRT 2015 CP1 application only, 18 MB (downloads test data the first time it’s run)

 

After trying out CP1, please send in your comments. Either post them to the forum or mail them to BenchmarkXPRTsupport@principledtechnologies.com. If you send us information that’s relevant to the entire community, we may post an anonymous version of your comments to the forum.

Thanks for your participation in the community!

Posted in Android, BenchmarkXPRT, BenchmarkXPRT development community, Collaborative benchmark development, Community Preview, MobileXPRT, MobileXPRT 2015 |

It’s almost here!

Eric Hale
By Eric Hale
on August 13, 2015

This Friday, we will be releasing the community preview of MobileXPRT 2015. BenchmarkXPRT Development Community members will be able to download the installation APK from the MobileXPRT tab in the Members’ Area. We are happy to say that, although we thought that MobileXPRT 2015 would only run on Android 5.0 and above, we have been able to extend its compatibility back to Android 4.4 (KitKat).

As we’ve said, the new MobileXPRT is a 64-bit application. Although it will work on both 32-bit and 64-bit hardware, the code will automatically select 64-bit when available. If you want to compare 32-bit performance to 64-bit on a single device, MobileXPRT 2013 will still be available. It’s not a problem to have both versions of MobileXPRT installed at the same time, and results from the two versions of the benchmark are comparable. On the same note, remember that the UX tests are no longer available in MobileXPRT 2015, but they are available as part of MobileXPRT 2013 if you need them.

As always, the results from the community preview will be comparable to the general release.

We hope you enjoy the new MobileXPRT, and we look forward to seeing your results!

Eric

Posted in BenchmarkXPRT development community, Collaborative benchmark development, Community Preview, MobileXPRT, MobileXPRT 2015 |

An update on MobileXPRT 2015

Eric Hale
By Eric Hale
on July 23, 2015

As I mentioned last week, we’ve been testing MobileXPRT 2015.

We’ve rebuilt the current MobileXPRT as a 64-bit application. This means that MobileXPRT 2015 will only run on Android 5.0 and above. For this reason, we’ll make MobileXPRT 2013 available for testing older versions of the operating system. Because the workloads haven’t changed, you’ll be able to compare results from MobileXPRT 2013 to those from MobileXPRT 2015.

Another change to MobileXPRT 2015 will be the removal of the UX tests. While these tests were useful on lower-end devices when MobileXPRT 2013 came out, they don’t distinguish modern devices. However, should you need them, these tests will continue to be available as part of MobileXPRT 2013.

There are a few other features that we’ll be talking about over the next few weeks. We’ll be releasing the MobileXPRT 2015 community preview before Android M is released. We’re looking forward to see how Android M performs!

Eric

Posted in Android, Android L, Android M, Collaborative benchmark development, Community Preview, MobileXPRT 2015 |

Get the 411 on WebXPRT 2015

Eric Hale
By Eric Hale
on July 16, 2015

We’re publishing the WebXPRT 2015 white paper tomorrow. It contains lots of information about WebXPRT 2015 that you won’t find anywhere else. In addition to explaining what the tests do, the test descriptions detail the particular aspects of Web browsing performance that the test stresses.

The white paper also contains a list of the third-party libraries that WebXPRT uses, what those libraries do, and where you can find them.  It also lists the HTML 5 capabilities that WebXPRT 2015 requires. And, as in past XPRT white papers, we include a spreadsheet showing how the benchmark calculates its results. There’s a lot of information, so check it out!

Meanwhile, we’re hard at work on MobileXPRT 2015.  The Android M Developer Preview 2 hasn’t presented any new problems, so things are looking good. I expect to have more details about the upcoming MobileXPRT 2015 community preview soon!

Eric

Posted in Android, Android M, MobileXPRT, MobileXPRT 2015, WebXPRT 2015, White papers |

Check out the other XPRTs:

Forgot your password?
© Principled Technologies, Inc. 2024   |   Privacy policy

Cookie Notice: Our website uses cookies to deliver a smooth experience by storing logins and saving user information. By continuing to use our site, you agree with our usage of cookies as our privacy policy outlines.

x